|
DigiFOX
Operates safely and reliable in the 434 MHz range with digital data packages for controlling any motor with digital encoders. The only unit which controls also the internal focus and start/stop function of the Panasonic HVX 200 camera.
* 16 channels selectable within the band of 434 MHz
* range of 600m / 2000 ft outdoors and 80 m / 300 ft indoors
* lightweight, compact receiver (size 8x4x9,5 cm / 3x1,5x3,7 inch, weight 260 g / 9 ounces)
* for external motors with incremental encoders, internal focus drives of ENG-lenses from Canon and Fujinon
* automatic calibration of endstops and power according to the lens torque
* resolution 32 Bit, integrated on/off (record start/stop) function
* electronic gear for compressing and expanding the transmission ratio between handwheel and lens ring
* memory of last settings, if power is lost (battery exchange)
* controls as well the ALADIN system's dimmer module for on-board lights
* integrated Serial Interface RS 232 for convenient software upgrades and provision for control by PC or PDA
* NMH Battery 6V, 600 mA DC; charger input 110-240 V AC, 17VA; comes with all international plug adaptors
* low power consumption, mostly one battery charge lasts one day
|
|
|
|
| Art.Nr |
Beskrivning |
| DF-400 |
DigiFOX system comprising: Transmitter with scale ring and antenna, Receiver with antenna, Fox battery NMH 6V/600mA, Fox battery charger 100 - 240 Volt
|
| Art.Nr |
Tillbehör |
| RMB |
Bracket for mounting receiver to 15mm LWS rods |
| M26VE |
Digital Hedén Motor, vertical mounting, gears module 0.8 + 0.6 + 0.5 + 0.4, bracket for mounting to 19mm + 15mm rods |
| AMOTD |
Motor Cable Digital Motors Lemo 8pin - to DigiFOX / Aladin Lemo 8 pin |
| FMB |
Fox battery NMH 6V/600mA |
| FANT |
Fox antenna (transmitter) as spare |
| FANTR |
Fox antenna (receiver) as spare |
| SC |
Scale ring for Fox |
| Art.Nr |
Combined Cables Power / On-Off |
| AA-A-P/cam |
Combined Cable: power + camera start/stop Aaton camera 6 pin Lemo, 45cm/17.7" - to DigiFOX / Aladin Hirose 4pin |
| Arri-A-P-Cam |
Combined Cable: power + camera start/stop ARRI camera 12V 11pin Fischer, 45cm/17.7" - to DigiFOX / Aladin Hirose 4pin |
| RS-A-P/cam |
Combined Cable: power + camera start/stop ARRI/Moviecam SL camera 24 Volt 3 pin Fischer, 45cm/17.7" - to DigiFOX / Aladin Hirose 4pin |
| PAN-A-P/cam |
Combined Cable: power + camera start/stop Panavision 10pin Lemo, 60cm/23.7" - to DigiFOX / Aladin Hirose 4pin |
| Art.Nr |
Power cables |
| DFCOFV-V |
Cable for start/stop at video camera directly at Hirose 12 pin - to DigiFOX Hirose 12 pin (attention: different wiring!) |
| DFCOFV-C |
Cable for start/stop at Canon lens Canon 8 pin - to DigiFOX Hirose 12 pin |
| DFCOFV-F |
Cable for start/stop at Fujinon lens Hirose 12 pin - to DigiFOX Hirose 12 pin |
| DFCOFAA2 |
Cable for start/stop Aaton camera Lemo 2 pin FFA.0S.302 - to DigiFOX Hirose 12 pin |
| DFCOFAA6 |
Cable for start/stop Aaton camera Lemo 6 pin FGG.1B.306 - to DigiFOX Hirose 12 pin |
| DFCOFMOV |
Cable for start/stop Moviecam Compact Fischer 2 pin S102AO51 - to DigiFOX Hirose 12 pin |
| DFCOFPAN |
Cable for start/stop Panavision Lemo 10 pin FFP.2S.310 - to DigiFOX Hirose 12 pin |
| DFCOFA |
Cable for start/stop ARRI 12V Fischer 11 pin S104AO056 - to DigiFOX Hirose 12 pin |
| DFCOFA-M |
Cable for start/stop ARRI, Moviecam SL, PRO 35 Adapter Fischer 3 pin S102AO52 - to DigiFOX Hirose 12 pin |
| Art.Nr |
Motor Cable |
| AMOTD |
Motor Cable Digital Motors Lemo 8pin - to DigiFOX / Aladin Lemo 8 pin |
| Art.Nr |
Cable for Panasonic DVX100 / HVX200(P2) |
| DFPMPVX |
Combined Cable: control of internal focus motor Panasonic DVX/HVX and start/stop function 2,5mm stereo jack + 3,5 mm phone jack 4 pole - to DigiFOX Hirose 12 pin. To power DigiFOX receiver you will need an additional cable (e.g. XLR4-AL) |
| Art.Nr |
Combined Cable for Power and Internal Video Focus Motor |
| DFPMCD |
Combined Cable: power + control of internal focus motor Canon Digital Hirose 20 pin - to DigiFOX Hirose 12 pin |
| DFPMCA |
Combined Cable: power + control of internal focus motor Canon Analog Hirose 6 pin - to DigiFOX Hirose 12 pin |
| DFPMF |
Combined Cable: power + control of internal focus motor Fujinon Analog Hirose 12 pin - to DigiFOX Hirose 12 pin |
| When using above combined cables and in case of additional need for camera start/stop by remote control: you have to choose following special DFCOF4x cables |
| Art.Nr |
CAM On/Off Cables when using combined cable DFPMx for internal focus motor |
| DFCOF4C |
Cable for start/stop of video camera (when using DFPMCx for Canon focus motor) Canon 8 pin - to DigiFOX Hirose 4 pin |
| DFCOF4F |
Cable for start/stop of video camera (when using DFPMF for Fujinon focus motor) Hirose 12 pin - to DigiFOX Hirose 4 pin |
| Art.Nr |
Dimmer for Camera Light |
| AL-LS |
Dimmer unit “Light-Source“ output dimm-power up to 75W/12V including XLR-LSC cable (operation instead of wireless focus control) |
| XLR-LSC |
Dimmer Cable with XLR 4 pin for power-in, Lemo 7pin to receiver motor socket, Lemo 3 pin to dimmer module (= spare cable) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MagFOX
WIRELESS REMOTE CONTROL FOR FOCUS AND CAMERA ON/OFF
FOR ANALOG MOTORS
System matches with all Heden/CP motors. Unit provides maximum resolution and accuracy in positioning and velocity (16 bits)
WIRELESS
Transmitter/Receiver: (433/434, 869 MHz 16/11 channels). No interference with current 1.2-2.4 GHz systems (video links - remote controls - computer networks etc.)
HARDWIRE
System may be run hardwire through any common BNC video cable.
SCALE ILLUMINATION
Via goose neck, white LED light for focus scale.
SCALE EXPANSION OR COMPRESSION
Quick & Easy calibration of any possible lens scale range.
TORQUE ADJUSTMENT on focus handwheel.
AMOTOR REVERSE FUNCTION on hand unit.
BATTERY SYSTEM Nimh for a full day's operating.
MEMORY FUNCTION
System memorizes all settings in the absence of power (battery change).
MOTOR CONTROL UNIT (RECEIVER)
Wide power input range 9 - 37 Volt DC with different power cables. Power consumption with motor connected ca. 1.5 Amp.
AUTOMATIC MOTOR CALIBRATION
Unit automatically sets up lens scale limits and torque.
CAMERA RUN FUNCTION On/off pulse switchable.
MOTORS - ACCESSORIES - PARTS see current list.
|
|
|
|
| Art.Nr |
Beskrivning |
| FA-400 |
Mag Fox transmitter with antenna (433-434MHz 16 channels), reciver with antenna (433-434MHz 16 channels), battery NiMh 6V/600mA, battery chareger 100-240V
|
| FA-800 |
Mag Fox Transmitter with antenna (869.7-869.9 MHz 11 channels), Receiver with antenna (869.7-869.9 MHz 11 channels), Fox battery NimH 6V/600mA, Fox battery charger 100 - 240 Volt |
| Art.Nr |
Tillbehör: ström kablar |
| AA-G/F12 |
Aaton - Fox power 12Volt, (6pin Lemo), 45cm |
| Arri-G/F12 |
ARRI - Fox power 12Volt, (11pin Fischer), 45cm |
| Arri-G/F24 |
ARRI - Fox power 24Volt, (3pin Fischer), 45cm |
| PRO-G/F12 |
PRO - Fox power 12Volt, (4pin Lemo), 20cm |
| RIG-G/F12 |
RIG - Fox power 12Volt, (3pin Lemo), 20cm |
| Mov-G/F24 |
MoviecamCom - Fox power 24V, (2pin Fischer), 45cm |
| Pan-G/F24 |
Panavision - Fox power 24Volt, (10pin Lemo), 60cm |
| STM-G/F12 |
Master - Fox power 12Volt, (2pin Lemo), 20cm |
| STU-G/F24 |
Ultra - Fox power 24Volt, (3pin Lemo), 20cm |
| XLR4-G/F12 |
XLR4 - Fox power 12Volt, (4pin XLR), 20cm |
| XLR4-G/F24 |
XLR4 - Fox power 24Volt, (4pin XLR), 20cm |
| AB-Al |
Anton Bauer - Fox power 12Volt, (AB Pow. Tap), 60cm |
| BP90-Al |
BP90 connector - Aladin power 12Volt, (BP90), 60cm |
| Art.Nr |
Tillbehör: Kamera ON/OFF kablar |
| FCOFAA2 |
Fox camera on/off - Aaton, (2pin Lemo), 30cm |
| FCOFAA6 |
Fox camera on/off - Aaton, (6pin Lemo), 50cm |
| FCOFA |
Fox camera on/off - ARRI, (11pin Fischer), 45cm |
| FCOFA-M |
Fox camera on/off - ARRICAM/435/535/SRIII/Movecam SL, (3pin Fischer), 30cm |
| FCOFMov |
Fox camera on/off - Moviecam Compact, (2pin Fischer), 30cm |
| FCOFPan |
Fox camera on/off - Panavision, (10pin Lemo), 100cm |
| FCOFV-F |
Fox camera on/off - Video Fuji, (12pin Hirose), 30cm |
| FCOFV-C |
Fox camera on/off - Video Canon, (8pin Canon), 30cm |
| FCOFV-V |
Fox camera on/off - Video Camera, (12pin Hirose), 30cm |
| Art.Nr |
Tillbehör: Motor kablar |
| FMOTCH |
Fox - HEDEN, CP-SLD motor, (5pin Lemo), 60cm |
| Art.Nr |
Tillbehör: Övrigt |
| AL-Si |
Scale ilumination light (for Fox Transm. with built in 2pin Lemo) |
| FAnT |
Fox antenna (transmitter) as spare |
| FAnR |
Fox antenna (receiver) as spare |
| SC |
Scale ring for Fox |
| str |
Neckstrap for Fox |
| FMB |
Fox battery NimH 6V/600mA |
| FMC |
Fox battery charger 100 - 240 Volt |
| F-Manu |
Fox Manuale as spare |
| V- Mount |
V-Mount Camera Adapter with 2-pin AB power tap |
|
|
|
|
|
|
|
|
|
 
|